I have actually heard that this automobile was developed by Ford under an agreement that the engines would certainly be cost-free running/non-interference therefore not bending valves. Is this true? I just want come know before I begin the job.Jose


You are watching: 2002 nissan quest timing belt replacement

*

I checked it out on RockAuto and also this is what lock say"Camshaft; no Interference Engine"So it can have bending valve. Ns would eliminate the both valve covers and rockers then execute a leak under test to view if any type of are bent.Here is just how the timing belt project is done and also the marks. Https://www.stclairdrake.net/diagrams/nissan/quest/2002Please let us know if you require anything else to obtain the trouble fixed.

I replaced a time belt and also water pump top top a 2002 Nissan quest. The timing marks to be aligned follow to the notches on the timing belt cover and also crankcase. Once I start the engine the runs, sputters and shuts off. Did ns align the time marks for the exhaust cycle, and if so, just how do i align the timing marks correctly for the compression cycle.
*

go T belt brake while driving? This engine is a no interference motor. Valves and pistons can not be damaged because they have sufficient clearance in the occasion of T-belt failure. If not see diagram if inside wall up top top intake video camer then it is correct.

*



*



See more: Who Was Damien In The Bible, Damian: Name Meaning, Origin, Popularity

Disconnect an unfavorable battery cable. Eliminate the engine undercover. Drain coolant and remove the radiator. Eliminate engine cooling fan and also water pump pulley. Remove accessory journey belts. Eliminate spark plugs. Remove distributor protector. Remove A/C compressor journey belt idler bracket. Remove fresh waiting intake tube from rocker cover. Remove thermostat real estate hose. Rotate crankshaft to collection No. 1 cylinder in ~ TDC ~ above compression stroke. . Eliminate crankshaft pulley-block bolt and remove crankshaft pulley. Eliminate front upper and also lower time belt coversAlign punch mark on left camshaft sprocket with punch mark on timing belt upper rear cover. Align punch mark on crankshaft sprocket v notch ~ above oil pump housing. Install crankshaft wheel bolt so that crankshaft can be rotated. Loosen time belt tensioner nut. Revolve tensioner, and remove time belt.